ESAB POWERCUT-1250 Bedienerhandbuch PDF herunterladen (Seite 9)

2.1 GENERAL

The patent pending PT-32EH is a manual torch with a

90° head designed for use with several Plasma Arc

Cutting Packages using clean, dry air as the plasma

gas. The service line lengths available with the PT-

32EH torch are 25 feet (7.6 m) and 50 feet (15.2 m).

The PT-32EH torch is rated to operate at a maximum

of 90 amperes at 100% duty cycle.

2.2 SCOPE

This manual is intended to provide the operator with all

the information required to assemble, operate, and

repair the PT-32EH Plasma Arc Cutting Torch. For

additional safety precautions, process instructions, and

system troubleshooting; refer to the appropriate in-

struction manual for your Plasma Arc Cutting Package.

The plasma arc cutting process employs high voltages. Contact with

"live" parts of the torch and machine must be avoided. Also, the

improper use of any of the gases employed can present a safety hazard.

Before beginning operation with the PT-32EH torch, refer to the Safety

Precautions and operating instructions in the appropriate power source

instruction manual.

Using the torch on any unit not equipped with a mating safety interlock

circuit may expose operator to unexpected high voltage.

SECTION 2 DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Keine Kommentare

ESAB POWERCUT-1250 Bedienerhandbuch Seite 9