ESAB MultiPower 460 Pulse Bedienerhandbuch PDF herunterladen (Seite 20)

.045

.040

.035

1/16

.052

WIRE TYPE

WIRE DIAMETER

PULSE SELECTION

EN-625 ERNiCrMo-3

STAINLESS

AL-4000

AL-5000

EN-60 ERNiCu-7

METAL CORE

STEEL

EN-67 ERCuNi

Voltage (CV)

Current (CC)

Trim (Pulse)

TEMP

POWER

BLINKING

WIRE SPEED

OUT OF RANGE

STEADY

NO PROGRAM

PRESET

MIG

LIFT

START

TIG

STICK

REMOTE

PANEL

STANDARD

MIG PULSE

Auto Fan

Fan will cycle automatically

Multipower 460PULSE

WFS-IPM

AMPS

VOLTS

SECTION 2 DESCRIPTION

5. Voltage / Current / Trim

The Power Source Open Circuit Voltage is controlled with this knob when the WELD PROCESS selector switch is in the MIG

position. The Mig open circuit voltage can be preset by pressing the PRESET button and reading the arc volts in the bottom

digital display while rotating this knob.

The weld current is controlled with this knob when the WELD PROCESS SWITCH is in the TIG or STICK position. The welding

current can be preset in amperes by pressing the PRESET button and reading the current (amps) in the top digital display

while rotating this knob. The average weld current will be displayed during welding.

For MIG PULSE welding, the welding power to the electrode is trimmed by turning the knob clockwise to increase pulse

power or counterclockwise to decrease pulse power.

6. Panel/Remote Switch

With this switch in the PANEL position, the output voltage in the CV mode and the output current in the CC mode is con-

trolled by adjusting the VOLTAGE/CURRENT/TRIM knob on the power source control panel to the desired output. In the

REMOTE position, output is controlled using a remote control device such as a hand or foot control.

Figure 2-3. Control Panel

Panel/

Remote

Wire Diameter

Selector (Pulse)

Weld Process

Switch

Material Selection

(Pulse)

Mode

Switch

Preset

Button

Voltage/

Current/Trim

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 68 69

Kommentare zu diesen Handbüchern

Keine Kommentare

ESAB MultiPower 460 Pulse Bedienerhandbuch Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schweißsystem ESAB MultiPower 460 Pulse