ESAB MIGMASTER 250 Bedienerhandbuch PDF herunterladen (Seite 16)

SECTION 2 DESCRIPTION

2.4.3 ST-23A SPOOL-ON-GUN TORCH, P/N 19164 (see F14-353)

The Migmaster 250 Plus unit is equipped with a built-in control for the ST-23A

Spool-On-Gun welding torch. The ST-23A is a high performance, 250 ampere

continuous duty spool-on-gun torch designed for the mig welding process. It is

completely portable (up to 30-ft.), air-cooled and hand operated, and weighs

less than three (3) pounds. The gun is equipped with lines that are 30 feet long.

For installation and operation, see Section 4.5.

2.4.4 MT-250GS SPOOL-ON-GUN TORCH, P/N 36779 (see F15-380)

The Migmaster 250 Plus unit is equipped with a built-in control for the MT-

250GS Spool-On-Gun welding torch. The air-cooled ST-23A is a medium duty,

200 ampere continuous duty spool-on-gun torch designed for the mig welding

process. The gun is equipped with lines that are 25 feet long. For installation

and operation, see Section 4.5.

2.5 SAFETY

Before the equipment is put into operation, the safety section at the front of this

manual should be read completely. This will help avoid possible injury due to

misuse or improper welding applications.

The symbol

which precedes safety notes appearing throughout this

manual means “Attention! Be Alert! Your safety is involved.” The definitions

relating to the DANGER, WARNING and CAUTION safety notations are

described at the end of the Safety Section in the front of this manual -- read them

and their specific text references carefully.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

Keine Kommentare

ESAB MIGMASTER 250 Bedienerhandbuch Seite 16