ESAB Origo Tig 3000i Bedienerhandbuch PDF herunterladen (Seite 5)

- 5 -

bt31d1ea

WARNING

Read and understand the instruction manual before installing or operating.

Arc welding and cutting can be injurious to yourself and others. Take precautions when welding and

cutting. Ask for your employer's safety practices which should be based on manufacturers' hazard

data.

ELECTRIC SHOCK - Can kill

 Install and earth the unit in accordance with applicable standards.

 Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.

 Insulate yourself from earth and the workpiece.

 Ensure your working stance is safe.

FUMES AND GASES - Can be dangerous to health

 Keep your head out of the fumes.

 Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone

and the general area.

ARC RAYS - Can injure eyes and burn skin.

 Protect your eyes and body. Use the correct welding screen and filter lens and wear protective

clothing.

 Protect bystanders with suitable screens or curtains.

FIRE HAZARD

 Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.

NOISE - Excessive noise can damage hearing

 Protect your ears. Use earmuffs or other hearing protection.

 Warn bystanders of the risk.

MALFUNCTION - Call for expert assistance in the event of malfunction.

PROTECT YOURSELF AND OTHERS!

WARNING

Do not use the power source for thawing frozen pipes.

CAUTION

Class A equipment is not intended for use in residential locations where

the electrical power is provided by the public low-voltage supply system.

There may be potential difficulties in ensuring electromagnetic

compatibility of class A equipment in those locations, due to conducted

as well as radiated disturbances.

CAUTION

This product is solely intended for arc welding.

CAUTION

Read and understand the instruction manual before

installing or operating.

ESAB can provide you with all necessary welding protection and accessories.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Keine Kommentare

ESAB Origo Tig 3000i Bedienerhandbuch Seite 5