ESAB PC-900 Bedienerhandbuch

Mechanized Conversion Kit Installation Instructionsfor PC-9000558008549 03/2011

10MECHANIZED CONVERSION KIT INSTALLATION INSTRUCTIONSred wire "+"black wire "-"14. Route the "2-wire cable" downward be

11MECHANIZED CONVERSION KIT INSTALLATION INSTRUCTIONS18. Secure the cable with a tie wrap as shown by arrow. 19. Plug 5-pin jumper into J13 header.

12MECHANIZED CONVERSION KIT INSTALLATION INSTRUCTIONS20. Voltage Divider Adjustment: The Voltage Divider or VDR can be adjusted to provide optimum c

13MECHANIZED CONVERSION KIT INSTALLATION INSTRUCTIONSMechanized Conversion Kit SchematicPC-900

14NOTES

15REVISION HISTORY1. 03/2011 - Updated mechanized conversion kit contents per J. Magee.

A. CUSTOMER SERVICE QUESTIONS: Telephone: (800)362-7080 / Fax: (800) 634-7548 Hours: 8:00 AM to 7:00 PM EST Order Entry Product Availability

2This equipment will perform in conformity with the description thereof contained in this manual and accompa-nying labels and/or inserts when installe

3Users of ESAB welding and plasma cutting equipment have the ultimate responsibility for ensuring that anyone who works on or near the e

4 SAFETY PRECAUTIONSWELDING AND PLASMA CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAUTIONS WHEN WELDING OR CUTTING. ASK FOR

5Powercut-900Mechanized Conversion Kit contentsp/n 0558008284MECHANIZED CONVERSION KIT INSTALLATION INSTRUCTIONSItem No. Part No. Qty Description1 0

61. Access the inside of the PC-900 by unscrewing the screws and removing the cover.2. Assemble the strain relief onto the 14 pin cable as s

7MECHANIZED CONVERSION KIT INSTALLATION INSTRUCTIONS4. Cut the tie wrap, unplug control transformer wires to allow for easier cable routing. 5. Thre

87. Tighten the strain relief nut from the inside rst and then tighten the outside strain re-lief nut. Position heatshrink over t

9Fast-on connectorsMECHANIZED CONVERSION KIT INSTALLATION INSTRUCTIONS10. Connect the pc board to the main power control board as shown below. Connec